In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They are considered ‘Green’ because they are environmentally friendly. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. However, it is the result of eco-efficient and planet friendly options that this process is maintained.
It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun - often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.
Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic - or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.
Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. Typically, to fit this type of equipment will cost between 500 and 1500 pounds for a DIY kit - all the way up to 2-5k for a full professional fitting.
Biomass Energy: This term encompasses all forms of natural products - such as plant and animal material. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. One of the main factors of this style of energy is the result without the impact on C02. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)
By the growth of Short Rotation Crops (SRC), the UK is able to maximise the ‘Energy Crops’ return overall. Of equal importance is the ability to produce dry matter - and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. One natural offshoot of agricultural work is Agricultural Waste. Because it comes from food or wood, Municipal Waste is also considered a useful biomass product.
Geo-Thermal Energy Systems… This is primarily the heating of the Earth (mainly from the sun) and can be utilised in electricity and warm water production. Heating or cooling properties in the UK can be achieved using the ground source heat temperature of around 12 degrees centigrade. Whilst these heat pumps require energy to operate, their rate of return is excellent - being four units produced for every one unit used. Heat source pump energy can go one step further (by gaining a 100 percent return) if the energy to power them comes from items such as wind turbines or solar electrical panels.
Wind Energy: As an energy source, wind energy has to be one of the oldest forms of energy creation in history. That aside, the ability to generate energy and both transfer this into the home or the local grid has been a relatively new option. With regard to wind generation, it is the UK that has the highest production within Europe. For the fact remains that, within the UK, we have the ability to generate 10 percent of our requirement from Wind Production - as opposed to the current value of only 1 percent. Electricity can be produced from as little as 2p per kWh, but generally comes in somewhere between 2-10p per kWh. The financial recovery process takes around 6-9 months.
Finally, we have Hydropower; an area in which the UK does well within Europe. The ability to utilise energy from moving water, much like wind power, has been going on for thousands of years. It is this type of energy production that could meet 2 percent of all the UK’s demand.
By using a turbine, a Hydropower system can transfer the kinetic energy of moving water into another form. Turbines use either a water drop (e.g. through a dam) or by a natural ‘run of the river’ - thereby having no water storage reservoir. ‘Micro-Hydro’ however utilises old outdated sluices and dams. Although a lesser known form of electricity output, this process could supply 200mW of UK demand. The expected cost of installing a system such as this would be between 200 pounds and 3k per kW of output.
It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. The UK domestic market appears to be one of the core beneficiaries of this technology.
Electrician and Plumbers are thought to be key in providing expertise during domestic installations. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.
(C) 2009 S. Edwards. Browse around electricianscourse.co.uk/GreenEngineerCertification.html or Renewable Energy Certification.