Whole Life Insurance

When you want to add style to your house, one way of doing so and adding security at the same time, is by having window shutters fixed to the outside of your home. Exterior window shutters add a traditional, Mediterranean look to a property. These days, most houses have glass windows, but before that, people used shutters to regulate the light levels, stop insects and the cold from entering and for security.

Exterior window shutters are available in many different shapes and made from various materials, although the most common ones are wooden and oblong. The quality of the materials used will determine how long your shutters will last, because, as with all exterior goods, they will be exposed to all types of extreme weather conditions.

Plastic, vinyl, metal and wooden shutters are to be had at many home improvement centres. Although they look fantastic, shutters also have practical uses. They can prevent glaring noon sunlight from over heating your home as well as providing protection.

Cedar wood is a good choice, as are most other hard woods. Hardwoods are more resistant to rain and sunlight and, so long as they are painted, varnished or oiled regularly - at least once a year - then your shutters will give you ten or more years of good service.

Most varieties of hardwood are very resistant to attack from insects as well. This is because a lot of them contain oils that are distasteful or even toxic to insects. However, if you are uncertain about the quality of the timber that your shutters are crafted from, you can paint them.

Painting, staining or oiling is far simpler if you carry it out before you hang the shutters. If you want to use oil to protect your new wooden shutters, first stain them to the shade that you want them to be with a stain without varnish. When you have achieved the desired shade and it has dried, pour oil linseed oil onto a cloth and rub it into the wood in circular movements. The more coats you give it the better, but it may not take more that two or three coats.

If you want to varnish your shutters, either stain them to the colour you require as above and then seal them with clear yacht varnish or use a stained yacht varnish without the stain. Whichever way you go, thin the first coat of varnish down until it is almost watery. Paint it on and leave to dry. Rub it down with medium coarse sandpaper and then coat it again with neat varnish. Wait for it to dry and sand it down again, but with fine sandpaper. Add at least one more coat, but it is a matter of the more the better.

If you want to paint them, apply a primer or some thinned down undercoat. Wait for it to dry and sand it lightly with fine sandpaper. Next, apply a coat of undercoat that is suitable for the finishing colour. For example, grey is good for black, brown and even green or red. Sand it down when it is dry with fine paper. Finally, gloss your shutters with the final colour.

In conclusion, hang the shutters on apposite hinges using brass screws. Next time, you paint or varnish your shutters paint over the screw heads, although brass never looks out of place anyway.

Owen Jones, the author of this piece writes on several subjects, but is at present concerned with researching wrought iron floor lamps. If you would like to know more or check out great offers, please go to our website at Wrought Iron Light

If you have just moved into a new, old house, one of the first things that you will probably want to do is refurbish or remodel the kitchen, especially if you like cooking or spending a lot of time in the kitchen. If you use a kitchen a great deal, you will probably already have a good idea of what you would like the kitchen to look like in the end.

One of the first decisions to make is whether you are going to do it yourself or oversee it yourself. There is a lot of work in a kitchen refurb and I have seen amateurs spend years, literally years, doing what a professional could have done in weeks. This always leads to family tensions. Once that I know of, it even led to divorce. It seems that everybody wants to boast that they are having refurbishments done, but no one actually wants to go through the hassle of having it actually done.

If you are not entirely sure what you want your kitchen to look like, it is a good suggestion to visit show kitchens in home improvement stores and even pick up brochures there to look at at home. You could also buy a few magazines and surf the Internet for suggestions.

Once you see a few examples that you like, be sure to cut out the pages and print off the image files after downloading them. This way you can build up a dossier of the things that you would like to integrate into your new kitchen..

Once you are pleased that you have all the components you like, you have to collate them. This does not have to be to scale or exact, but just as good as you can do with what you have. Take a large sheet of paper, say A3, and draw in your kitchen’s windows and doors.

Then cut out the pictures of the items you want from the magazines and brochures and stick them in place. If you think that this is not feasible, draw them in and label them unmistakably so that you can refer back to your picture file.

You need not stop at one drawing, you can play about with it. If you cut the pictures out, but do not glue them down, you can move them around until you are happy. You may also want to get the input of other members of the family and have a brain storming session

When you have finished, decide how you are going to illuminate the kitchen. Do you want a pendant light over the table? Do you want spots pointing at the cooker and the sink? Do you want concealed down-lighting to shine on the work surface? How are you going to see what you are doing? It is a very important question. Wall lights are great for ambient lighting.

Lastly, you have to choose a colour scheme and you are almost ready to start, unless you are using a builder and then you will have to select one first, but that will make up the contents of another article.

Owen Jones, the author of this piece writes on several topics, but is at present involved with researching wrought iron floor lamps. If you would like to know more or check out great offers, please go to our website at Wrought Iron Light